Quick question
Thread Starter
|
5th Wheeling
Joined: Jan 2013
Posts: 31
Likes: 1
From: DFW
Quick question
I've been having some issues with my brakes lately, and I'm pretty sure that the factory brake booster and master cylinder, which are now 15 years old and have 221,000 miles on them, are about ready to be replaced. My question is whether these can be replaced as an assembly, or if they have to be individually removed and installed.
Additionally, does anybody have a good howto on replacing these 2 parts for a 1998 half ton w/o hydroboost? Is there anything I should be wary of when doing this work?
Any tips or suggestions would be welcome at this point.
Thanks!
Additionally, does anybody have a good howto on replacing these 2 parts for a 1998 half ton w/o hydroboost? Is there anything I should be wary of when doing this work?
Any tips or suggestions would be welcome at this point.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
AZSCAWPION
1961 - 1966 F-100 & Larger F-Series Trucks
0
Mar 27, 2017 10:30 PM
lugnutx2
1967 - 1972 F-100 & Larger F-Series Trucks
8
Jun 22, 2009 01:22 PM
mtntop1
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Apr 3, 2009 03:32 PM
