A4ld under dash adjustment
Thread Starter
|
Junior User
Joined: Mar 2002
Posts: 56
Likes: 0
From: Detroit area
A4ld under dash adjustment
I have an 85 Bronco II 4X4 with the 2.8 and A4ld combo. Under the dash is an adjustment box for the trans, and I had once heard the trick to properly adjust this, however, I have forgotten the secret. Something about loosening it....pushing the accelerator to the floor, retightening it ........who knows? Hopefully someone here, I never adjusted it since I have gotten the vehicle, and I have pulled out the trans and had it rebuilt since then. Thanks in advance for any info.
Tuned
Joined: Apr 2003
Posts: 394
Likes: 13
From: 13th Colony
A4ld under dash adjustment
If it is like my 88, you push in the release outside the firewall and pull the cable all the way out. Make sure the release then locks in place. When you push the pedal to the floor, it will automatically adjust itself out. The cable is attached to your gas pedal with your throttle cable.
BroncoBasher
BroncoBasher
