I finally got my rear sump oil pan and pickup tube dirt cheap.Question is when the dip stick is all the way in it only stick out the bottom of the tube about 3/4 of a inch.Is that right or does it have the wrong dip stick with it?And are the rear sump pans still a 5qt oil pan?Thanks alot guys

 

351M/400 ~ 1977/79 F150/250 4WD / 1978/79 Bronco / 1979 F350 4WD

D7TZ-6750-A .. Engine Oil Dipstick / Stamped with ID number: D7TE-6750-BA / Obsolete ~ 5 available NOS

20.64" top of shield to safe / 23.40" top of shield to add 1 / 24.90" top of shield to end.
------------------------------------------------------------------------------------
D7TZ-6754-A .. Engine Oil Dipstick Tube ~ 24.11" long / Obsolete ~ 0 available NOS

 

Ok mine is stamped with D7TE-6750-BA so it does have the right dipstick with it right?

 

6 quarts when replacing filter.

 

measure it, number dummy just gave you the right length. some people trim their tubes down till the dipstick is the right length.

 

Thanks 351coupe