Clutch abuse...
Post Fiend
Joined: Feb 2009
Posts: 8,005
Likes: 7
From: Ottawa, Ontario
My 300 does this to, if I let it go to idle (700RPM) then push clutch in, slide in Neutral, let off clutch pedal, the RPM's will jump back up to 1100RPM and stay there until I come to a complete stop, then fall to 700.
I also hate that I have to rev the 300 to 2500RPM before shifting, cause if I shift at a lower RPM then that, the revs come back down slowly, and I have to shift extremely slowly to get a nice smooth shift, if not, the clutch brings down the RPM and gives the truck a small jerk. ****ing computer controlled engine!
I also hate that I have to rev the 300 to 2500RPM before shifting, cause if I shift at a lower RPM then that, the revs come back down slowly, and I have to shift extremely slowly to get a nice smooth shift, if not, the clutch brings down the RPM and gives the truck a small jerk. ****ing computer controlled engine!
Thread
Thread Starter
Forum
Replies
Last Post
AKHunter93
1987 - 1996 F150 & Larger F-Series Trucks
20
Feb 15, 2016 12:06 PM
CaptainFacePunch
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
22
Mar 22, 2015 10:21 PM
whiteyfordzx5
1987 - 1996 F150 & Larger F-Series Trucks
15
Jun 28, 2007 10:58 AM
