Broken autolock hub need help!!
Thread Starter
|
New User
Joined: Jan 2013
Posts: 2
Likes: 0
From: Fort Knox
Broken autolock hub need help!!
Hey guys i'm new on here today as i was trying to grease my hubs i broke one. 
The drivers side came out without a problem, but when i went to remove the passenger side the dial ripped off the hub. The hub seems to be seized in there so i sprayed it with pb blaster and now i cant seem to find a tool to grab it while its still stuck any ideas? thanks
The drivers side came out without a problem, but when i went to remove the passenger side the dial ripped off the hub. The hub seems to be seized in there so i sprayed it with pb blaster and now i cant seem to find a tool to grab it while its still stuck any ideas? thanks
Thread Starter
|
New User
Joined: Jan 2013
Posts: 2
Likes: 0
From: Fort Knox
Thanks
right, i've been trying that but the black plastic pieces that hold the exterior face on the hub broke and the grey face pulled off. thus the rest of the hub mechanism is stuck and i cant seem to fit a screwdriver in there to losen it
Thread
Thread Starter
Forum
Replies
Last Post
