HELP
Thread Starter
|
New User
Joined: Dec 2012
Posts: 5
Likes: 0
From: galesburg
HELP
I have an 04 f350 with the 6.0 turbo diesel. I just replaced the icp sensor. then repalced the gaskets on the oil pump the intake the egr cooler and the turbo. I had to take alot off to get to all this so now i have it all back together and am gettin p1000 code along with a few others. and the solenoid on the turbo is stuck and the truck does not want to stay running. what should i do now. also would like to add the guy i got this truck from had a toggle switch ran to the turbo solenoid and i did away with it. it also has the bully dog system. does this have anything to do with it.
Cargo Master
Joined: Oct 2012
Posts: 2,333
Likes: 35
From: South Carolina
Hi Woody and welcome to FTE. There is a forum dedicated to the 6.0 guys - and a lot of good info to be found there. You may want to post your same question there. Good luck!
Here is the link to the 6.0 Forum: 6.0L Power Stroke Diesel - Ford Truck Enthusiasts Forums
Here is the link to the 6.0 Forum: 6.0L Power Stroke Diesel - Ford Truck Enthusiasts Forums
Thread
Thread Starter
Forum
Replies
Last Post
Forddeiselman
1999 - 2016 Super Duty
7
Dec 29, 2005 07:32 PM
