Starting issues with 03 EXPY 5.4 EB
Thread Starter
|
New User
Joined: Nov 2012
Posts: 9
Likes: 0
Starting issues with 03 EXPY 5.4 EB
Starting issues with 03 EXPY 5.4 EB
I had a few things change by my local dealer last week,plugs,t-stat,inlet manifold and coil. Since this work was done,the truck is messing around.
(1) The heater vents stop blowing,but warm air is present. I took it back,apparently they did not connect a hose.
(2) My wife was having difficulty starting the truck,when I went to look at it,I eventually got it started,but i noticed that the temperature gauge was not reading. I drove for an hour and still no response.
(3) I also notice the truck is idling at about 1100RPM.
Any opinion on this matter is welcome
Will take the truck back to the dealer in the morning.
Thanks
I had a few things change by my local dealer last week,plugs,t-stat,inlet manifold and coil. Since this work was done,the truck is messing around.
(1) The heater vents stop blowing,but warm air is present. I took it back,apparently they did not connect a hose.
(2) My wife was having difficulty starting the truck,when I went to look at it,I eventually got it started,but i noticed that the temperature gauge was not reading. I drove for an hour and still no response.
(3) I also notice the truck is idling at about 1100RPM.
Any opinion on this matter is welcome
Will take the truck back to the dealer in the morning.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
BIGTEE34
1997 - 2006 Expedition & Navigator
1
Dec 9, 2012 11:34 PM
