October, 2012 Junk Yard Wishlist
Thread Starter
|
Moderator
Joined: Nov 2007
Posts: 22,415
Likes: 92
From: Denver Metro Area, CO
October, 2012 Junk Yard Wishlist
This was a neat idea, thanks again to lgwilson for suggesting this! 
Last month's will be unstuck & closed.
Post your wants & needs here, even if they were on last month's list; there's enough chatter on the old one it gets hard to know if somebody is still needing a part or not without reading through the entire thing.
Please keep monetary-transaction talk amongst yourselves - in PMs or e-mail.
It's fine if we want to give/sell things to each other but we can't be running a Flea Market or Auction House here, that's against the spirit of what we do here - people helping each other.
You might also check out the 80-86 Truck Parts - Free to a good home thread.
-chris
Last month's will be unstuck & closed.
Post your wants & needs here, even if they were on last month's list; there's enough chatter on the old one it gets hard to know if somebody is still needing a part or not without reading through the entire thing.
Please keep monetary-transaction talk amongst yourselves - in PMs or e-mail.
It's fine if we want to give/sell things to each other but we can't be running a Flea Market or Auction House here, that's against the spirit of what we do here - people helping each other.
You might also check out the 80-86 Truck Parts - Free to a good home thread.
-chris
Logistics Pro
Joined: Jun 2008
Posts: 4,990
Likes: 6
From: Florida
Hey guys, I'm looking for a transfer case shifter trim ring from a 1980-1981 truck or Bronco. I included a picture below for identification purposes.
I'm also looking for a 1980-1981 Transfer Case shift ****. It's the threaded kind.
I'm also looking for a 1980-1981 Transfer Case shift ****. It's the threaded kind.
New User
Joined: Sep 2012
Posts: 8
Likes: 0
hey all, I'm lookin for a wiring harness for my DS2 swap. I'm beginning my collection before i do the swap and thats been the hardest to locate. also will need '83 or earlier distributor and ignition module. I have the awesome feedback carb and egr valve that wont be needed anymore once I get on it as well willing to talk prices.
thanks
thanks
Lead Driver
Joined: Jul 2009
Posts: 6,477
Likes: 19
From: Sheffield, AL
hey all, I'm lookin for a wiring harness for my DS2 swap. I'm beginning my collection before i do the swap and thats been the hardest to locate. also will need '83 or earlier distributor and ignition module. I have the awesome feedback carb and egr valve that wont be needed anymore once I get on it as well willing to talk prices.
thanks
thanks
Elder User - What???
Joined: Dec 2011
Posts: 714
Likes: 1
From: Moore, OK
Hello All,
Still looking for a factory tachometer for my 1983 F-150, 300/4.9L. If anyone has one or sees one at a salvage yard, please let me know (especially if you are in Oklahoma). I have gauges instead of idiot lights, so my printed circuit board is ready to go.
I'm also looking for a good 3.54 ratio gear set for a Dana 44, IFS. I have the early, externally retained axle stubs if it matters any. The one in my donor front end is a 3.00.
Thank you!
<!-- / message -->
Still looking for a factory tachometer for my 1983 F-150, 300/4.9L. If anyone has one or sees one at a salvage yard, please let me know (especially if you are in Oklahoma). I have gauges instead of idiot lights, so my printed circuit board is ready to go.
I'm also looking for a good 3.54 ratio gear set for a Dana 44, IFS. I have the early, externally retained axle stubs if it matters any. The one in my donor front end is a 3.00.
Thank you!
<!-- / message -->
New User
Joined: Sep 2012
Posts: 8
Likes: 0
thanks 1985f150, I probably should be more specific bout my truck. it's an 85 300 4.9L. thanks guys. y'all have been a big help
Trending Topics
Posting Guru
Joined: Jul 2004
Posts: 1,686
Likes: 0
From: East Tn
I need the horn pad from the steering wheel. 83 xl
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Elder User
Joined: Feb 2003
Posts: 871
Likes: 0
From: Coleman, Wisconsin
I would give a lung and a half to anyone with an 80's stepside box they'd sell. I don't need the fenders, or even a floor. Just the bedsides and tailgate. Unfortunately Mar-K produces everything, except the bedsides.
New User
Joined: Sep 2011
Posts: 15
Likes: 0
From: Joplin, Missouri
Hello.. looking for a steering column for my 1986 F150 XLT Lariet...my currant column is non tilt with 3speed auto shift on column...feel free to text or email me! Would settle for tilt/w shift column or no tilt/no shift on column. I am thinking of installing after-market floor shifter so a non-shift column would be cool