need help with dana 44
Thread Starter
|
Senior User
Joined: Jan 2006
Posts: 128
Likes: 0
From: St. Peter, MN
need help with dana 44
first of all, I have a 73 F-250 Highboy that's a collection of differant parts from differant years. Since the parts guys now a days only know what their computer tells them, I need some help figuring out what my front axle came out of.
this is what I know from examining it:
1) numbers on the short shaft on drivers side are "11 22 7 A5" and "660028".
2) casting on lower left of the cover has "44 9F"
3) casting on lower right of the cover has "C38"
4) locking hubs are 3-1/2" in diameter
5) ring gear has "7 13 77 Dana 33850A", "A3 something", "45-11", and "494".
6) It has disc brakes with dual piston calipers.
this is what I know from examining it:
1) numbers on the short shaft on drivers side are "11 22 7 A5" and "660028".
2) casting on lower left of the cover has "44 9F"
3) casting on lower right of the cover has "C38"
4) locking hubs are 3-1/2" in diameter
5) ring gear has "7 13 77 Dana 33850A", "A3 something", "45-11", and "494".
6) It has disc brakes with dual piston calipers.
Thread
Thread Starter
Forum
Replies
Last Post
Feardeere7
Clutch, Transmission, Differential, Axle & Transfer Case
2
Apr 4, 2014 09:57 AM
