Front D44 question
Thread Starter
|
Senior User
Joined: Jan 2012
Posts: 169
Likes: 0
From: Antelope, California
Front D44 question
Im changing the bearings on the front D44-6F and i am not sure if i have to press in the new bearings.. Can anyone shed some light on this for me and if i have to press them in, where i can rent/borrow/steal a bearing press haha! thanks!
Thread Starter
|
Senior User
Joined: Jan 2012
Posts: 169
Likes: 0
From: Antelope, California
Ok, so i didnt need a press, i just hammered them out slowly and they came right out. And during my research i found this info for the D44 & D60. Here ya go, hope this helps someone else too. Uber Axle Tech
Thread
Thread Starter
Forum
Replies
Last Post
crazy96863
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
12
Apr 14, 2013 01:09 AM
mudder460
Clutch, Transmission, Differential, Axle & Transfer Case
3
Jun 22, 2011 10:42 AM
