windage tray
Thread Starter
|
Senior User
Joined: Jan 2003
Posts: 217
Likes: 0
From: Saraland AL
windage tray
I just finished installing a windage tray on the 400 I'm building. Good thing I have some fabrication experience.
DO NOT let anyone tell you that the main studs for the tray will fit all 351's and 400's! They don't fit 400's- TOO SHORT! Won't clear the extra stroke without major altering/ refitting to the tray.
I would have sent them back to Jeg's but I want to button up the engine by this weekend.
This is a rear sump tray by Milodon that would have fit very well if I had the right length studs.
DO NOT let anyone tell you that the main studs for the tray will fit all 351's and 400's! They don't fit 400's- TOO SHORT! Won't clear the extra stroke without major altering/ refitting to the tray.
I would have sent them back to Jeg's but I want to button up the engine by this weekend.
This is a rear sump tray by Milodon that would have fit very well if I had the right length studs.
