Power Door Locks
Thread Starter
|
Junior User
Joined: Apr 2012
Posts: 94
Likes: 0
Power Door Locks
I remember reading somewhere about installing actuators to gain power door locks. Unfortunately I didn't bookmark the site and don't recall what they used as a donor. Power windows are covered in this thread. Can anyone point me in the right direction on the lock actuators?
FTE Legend
Joined: Jun 2004
Posts: 31,966
Likes: 2,407
From: Upstate NY
Yo, check out this thread! 
https://www.ford-trucks.com/forums/3...oor-locks.html
Not our years exactly but should be able to reapply!
https://www.ford-trucks.com/forums/3...oor-locks.htmlNot our years exactly but should be able to reapply!
Thread Starter
|
Junior User
Joined: Apr 2012
Posts: 94
Likes: 0
I came across this thread as well https://www.ford-trucks.com/forums/1...s-windows.html
One person did a set of rear solenoids from a four door Explorer and also used the power windows from it.
They still aren't on orphan years but gives more information. As I get closer to install I will post pictures and info in this thread.
One item that came up was using a RFID key to autounlock and allow a push button start.
One person did a set of rear solenoids from a four door Explorer and also used the power windows from it.
They still aren't on orphan years but gives more information. As I get closer to install I will post pictures and info in this thread.
One item that came up was using a RFID key to autounlock and allow a push button start.
Thread
Thread Starter
Forum
Replies
Last Post
