am i missing something?
Thread Starter
|
Posting Guru
Joined: Feb 2008
Posts: 2,184
Likes: 0
From: dayton ohio
am i missing something?
i cant seem to get this part off
i have knocked all 5 studs out and soaked it in pb blaster,tried an air chisel, tried a big hammer and a regular chisel and hit it on the edge with a even bigger hammer. cant seem to pop it loose. what am i missing?
i have knocked all 5 studs out and soaked it in pb blaster,tried an air chisel, tried a big hammer and a regular chisel and hit it on the edge with a even bigger hammer. cant seem to pop it loose. what am i missing?
Fleet Owner
Joined: May 2009
Posts: 21,437
Likes: 76
From: Gilbert, PA
You can either keep beating the chisel
Or go rent a slide hammer and spindle socket from auto zone and have it off pretty quick.
4WD Spindle Puller | AutoZone.com
Or go rent a slide hammer and spindle socket from auto zone and have it off pretty quick.
4WD Spindle Puller | AutoZone.com
Thread
Thread Starter
Forum
Replies
Last Post
mikeinri
1987 - 1996 F150 & Larger F-Series Trucks
23
Oct 27, 2020 09:20 PM
64deville
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
19
Mar 27, 2012 07:57 PM
F250racer
1948 - 1956 F1, F100 & Larger F-Series Trucks
5
May 24, 2010 07:57 PM
Jim TN
1987 - 1996 F150 & Larger F-Series Trucks
15
Oct 4, 2007 10:57 AM
holland501
Brakes, Steering, Suspension, Tires, & Wheels
12
Oct 25, 2006 02:13 PM
