Quick Help
Thread Starter
|
Junior User
Joined: Nov 2010
Posts: 83
Likes: 0
From: Katy TX
Quick Help
I am in the middle of a injector change on the drive side
I have the valve cover off and there is a different fuel rail than what is shown in the master tech video. On the 6.0 , 03 model. I don't have the tool to take the line off. My question is can I leave the line/hose connected and move it out of the way and still get to the injectors? Is there another way to get the line off?
Thanks for any info.
I have the valve cover off and there is a different fuel rail than what is shown in the master tech video. On the 6.0 , 03 model. I don't have the tool to take the line off. My question is can I leave the line/hose connected and move it out of the way and still get to the injectors? Is there another way to get the line off?
Thanks for any info.
Hotshot
Joined: Apr 2010
Posts: 19,071
Likes: 241
From: Saratoga Springs,UT
So if I understand correctly you have the straight oil rail ontop the injectors????
If so^^^^ undo the bolts that hold the rail down leave the oil rail hooked to the Braded line and just pivot the rail up out the way it will twist out the way
If so^^^^ undo the bolts that hold the rail down leave the oil rail hooked to the Braded line and just pivot the rail up out the way it will twist out the way
Postmaster
Joined: Jul 2011
Posts: 3,263
Likes: 0
From: Houston, TX
welcome to the 6.0 forum. hopefully, u'll be able to post up here in the future for quicker responses, or u can send me a pm. i might even head out ur way to give u a hand if u need an extra pair of hands. just one six-oh helping out another.
have a great sunday, y'all.
have a great sunday, y'all.
Postmaster
Joined: Jul 2011
Posts: 3,263
Likes: 0
From: Houston, TX
by the way, join our texas chapter for fun and hangouts and tech days as well. attached is the link to sign up with our texas chapter. look forward to meeting u at our tech days!
https://www.ford-trucks.com/forums/p...usergroupid=46
https://www.ford-trucks.com/forums/p...usergroupid=46
Thread
Thread Starter
Forum
Replies
Last Post
