Thermactor plug

Reply Subscribe

Thread Tools

Search this Thread

May 10, 2003 | 02:33 PM

JoeBlow

Thread Starter

Senior User

Joined: May 2002

Posts: 353

Likes: 1

From: Bayonne NJ

Thermactor plug

I have taken off the a i r pump that came with my truck and now i have the thermactor port open on the right cylinder head. Is there any way to plug this up?

thanks guys

May 10, 2003 | 04:11 PM

Torque1st

Posting Legend

Joined: Sep 2001

Posts: 30,255

Likes: 37

Thermactor plug

What engine?

If it is a 351M/400 you can use a screw in pipe plug for the port in the intake manifold.

If it is a 302/351W then make a plate and a gasket from gasket material and bolt it back on.

May 14, 2003 | 06:50 PM

JoeBlow

Thread Starter

Senior User

Joined: May 2002

Posts: 353

Likes: 1

From: Bayonne NJ

Thermactor plug

Just found out, Trick flow makes a plug for the heads. Part number TFS # 51400265. Summit has it for under $3.00.

May 14, 2003 | 10:14 PM

Torque1st

Posting Legend

Joined: Sep 2001

Posts: 30,255

Likes: 37

Thermactor plug

Thanks Joe! I will file that away in my notes.

May 15, 2003 | 12:00 AM

montanaboy

Freshman User

Joined: Feb 2003

Posts: 26

Likes: 0

Thermactor plug

I took the emissions off of a 460. The plugs in the front of the heads were bad so I went to Napa and they looked in thier book and got the right size plugs. $2.00 for all 4, and no more problems.