460 build up
Thread Starter
|
New User
Joined: Apr 2003
Posts: 22
Likes: 0
From: seattle
460 build up
im building a new engine for a 93 crewcab 4x4. it got a 460 fi. i would like to put a better cam in it but ive heard about the computers will only accept a stock cam. im pulling a 21 foot boat(daycruser) and the stock cam seemed a little gutless.without the boat on i like the way it runs and im not a fan of rv cams(had on in my 351w van and it was guttless).pluss i would like to go with a supper chip.any sugestions are needed . thanx
Senior User
Joined: Mar 2003
Posts: 378
Likes: 0
From: Corvallis oregon
460 build up
clal Jegs at 1-800-345-4545
or Summit at 1-800-230-3030
They will fix you up. You can run a bigger cam then stock, just not too much bigger. The chip may allow you to run a bigger one, I couldn't tell you.
Have fun
or Summit at 1-800-230-3030
They will fix you up. You can run a bigger cam then stock, just not too much bigger. The chip may allow you to run a bigger one, I couldn't tell you.
Have fun
