same trouble codes
Thread Starter
|
New User
Joined: Jun 2012
Posts: 9
Likes: 0
same trouble codes
Well thanks for everyones help so far. After changing both 02 sensors I'm still throwing the same codes. 1130 and 1150 (lack of heated 02 sensor banks 1 and 2) and 0171 and 0174(system to lean banks 1 and 2). Could this be a malfunction in the pcm. This could explain some of my weird tranny issues. I have a 96 250 4x4 auto w/ 460. Ive also thoght about the ECC being the problem. My 2 biggest issues are that it takes a long time for the truck to heat up, by that I mean if it's 100 outside I start my truck and it pops and almost dies when I give it gas, once I let it idle for 5 min its fine. When i'm traveling at highway speeds it will die, not literally but I'll be doing 65 and then no power, I'll have to pull off to the side come to a complete stop and then I can take off again. The truck never actually stops running. I've also noticed that after I fuel up it has a tendency to be gutless for about the first mile or so. Thanks in advance for any input.
Marc
Marc
Thread
Thread Starter
Forum
Replies
Last Post
Stevil
3.8 & 4.2L V6
3
May 2, 2012 06:55 AM
radsickt
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
5
Oct 11, 2000 10:47 PM
