351M HP
Thread Starter
|
New User
Joined: May 2012
Posts: 3
Likes: 0
351M HP
I am done rebuilding a 351M and am wondering how much power is this engine is putting out.
This is a total rebuild from the block up, I had to bore the engine .040 over stock, added a crane performance Cam, aftermarket heads, Edlebrock Intake, 650 Edlebrock Carb, and Headers. Don’t have access to any Dyno Machine, but am wondering how much Horse power this engine is putting out. She seems to have tons of torque and power. It has low gears (Dana 60 4:10), but she seems to move this heavy F250 with 35’s no problem. Just a ball park...... What do you think this engine is putting out?
This is a total rebuild from the block up, I had to bore the engine .040 over stock, added a crane performance Cam, aftermarket heads, Edlebrock Intake, 650 Edlebrock Carb, and Headers. Don’t have access to any Dyno Machine, but am wondering how much Horse power this engine is putting out. She seems to have tons of torque and power. It has low gears (Dana 60 4:10), but she seems to move this heavy F250 with 35’s no problem. Just a ball park...... What do you think this engine is putting out?
Laughing Gas
Joined: Jun 2010
Posts: 1,056
Likes: 10
From: Indiana, PA
If you get on compcams website there is a section called camquest. It`s kinda neat. You choose one of their cams which is as close to what yours is and type in the rest of your motors parameters. Then you can click on their dyno-results button and it will give you a guesstimate.
Thread
Thread Starter
Forum
Replies
Last Post
iceman320
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
30
Feb 25, 2008 12:52 AM
79 FORD
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
7
May 26, 2006 01:24 AM
trinogt
1973 - 1979 F-100 & Larger F-Series Trucks
12
Jun 15, 2002 08:18 PM
