Help on bench seat ????
Thread Starter
|
New User
Joined: Oct 2011
Posts: 17
Likes: 0
From: North Idaho
Help on bench seat ????
Hello Gents, I need to know if the bench seat from an 87 F150 will bolt onto the seat frame of my 79 F-250. It would save me the hassels of my continual search if that is possible.
Thank You, Rob
Thank You, Rob
Cargo Master
Joined: Apr 2009
Posts: 3,038
Likes: 4
From: South west Idaho
Yes it should, i used the rear seat from my 87 crew cab dually in a 79 f-100. just transfer the 79 tracks to the 87 seat,works great and looks original.
What part of Idaho are you located,i'm in the south west corner ?
What part of Idaho are you located,i'm in the south west corner ?
Thread Starter
|
New User
Joined: Oct 2011
Posts: 17
Likes: 0
From: North Idaho
Thanks Gents, I did finally find a post where other members stated that the seats will work up to '96. just have to swap them on to my rails. Picked up the seat this morning, but rain is got me on hold since last night getting my seat out.
Jim, I am all the way at the top, outside Bonners Ferry.
My truck is going to be a long time running project, but I enjoy working on it.
Thanks, Rob
Jim, I am all the way at the top, outside Bonners Ferry.
My truck is going to be a long time running project, but I enjoy working on it.
Thanks, Rob
Cargo Master
Joined: Apr 2009
Posts: 3,038
Likes: 4
From: South west Idaho
Thanks Gents, I did finally find a post where other members stated that the seats will work up to '96. just have to swap them on to my rails. Picked up the seat this morning, but rain is got me on hold since last night getting my seat out.
Jim, I am all the way at the top, outside Bonners Ferry.
My truck is going to be a long time running project, but I enjoy working on it.
Thanks, Rob
Jim, I am all the way at the top, outside Bonners Ferry.
My truck is going to be a long time running project, but I enjoy working on it.
Thanks, Rob
I thought you might be in that area after seeing you were up north . I know the general area around sand point,C.L. Never have had a chance to look around much.
My latest,73 F-100, is going to be my last I think ,so just going to take my time and make it my way. Been doing car ,truck stuff since about 1959 . Time to just play with my 35 chev and tinker with the 73.
Thread
Thread Starter
Forum
Replies
Last Post
