coil spacers help
Thread Starter
|
Senior User
Joined: Jul 2011
Posts: 131
Likes: 0
coil spacers help
Hey there, so i bought 2 coil spacers to lift the front of my truck so it matches the back better. Well..i dont see how i can put the spacers in..they wont fit on the top between the coil and were the coil presses against. and theres no cowl for it so sit on the bottom..so were do i put it?? 95 f150 xl 4x4
Thanks
Thanks
Senior User
Joined: Dec 2008
Posts: 101
Likes: 1
Check with the manufacturer of the spacers. They will usually have a guide as to the best installation of there product. Also be sure that the product you bought is actually for your truck. A lot of times auto parts stores will sell you a product that says it will fit your truck but actually wont. Esp if the person at the counter is inexperienced. And if you bought a generic coil spring spacer I would recommend you look into getting a leveling kit instead. The generic spacers are not usually meant for 4x4 applications. That is another thing you need to check with the manufacturer about.
Senior User
Joined: May 2010
Posts: 369
Likes: 2
From: BC Cana'duh
What kind of spacer?The polyurethane type with the bolt extension are made to have the spring rest on the spacer.Post a pic or part # and manufacturer.That would help.My GUESS is the 2 inch urethane style.It's not difficult to install but it can be dangerous as you have to remove the coil spring to do so.
Do your spacers look like this?
Thread
Thread Starter
Forum
Replies
Last Post
my91stealth
1987 - 1996 F150 & Larger F-Series Trucks
2
Dec 19, 2010 07:30 PM
abelmoreno
1987 - 1996 F150 & Larger F-Series Trucks
12
Dec 15, 2005 12:21 PM
