PCV grommet
#1
PCV grommet
Does anyone know of a source for the valve cover PCV grommet, i need the one for the "powered by ford" valve covers...
they have a notched hole and the PCV grommet has two ears that twists on the valve cover just as a breather would...
all i can find is the universal push-in type grommet, i've checked with all the usual suspects and came up empty, thanks.
they have a notched hole and the PCV grommet has two ears that twists on the valve cover just as a breather would...
all i can find is the universal push-in type grommet, i've checked with all the usual suspects and came up empty, thanks.
#3
I found one (thanks to fellow member EffoneHunded)
1965 - 1973 Mustang PCV Valve Cover Grommet: Engine & Valve Covers
1965 - 1973 Mustang PCV Valve Cover Grommet: Engine & Valve Covers
#5
PCV Grommet 2" for Notched Valve Covers
1965-1973 Notched PCV Valve Cover Grommet (C7AZ-6892)
i am not sure any of these places are for real so watch out
1965-1973 Notched PCV Valve Cover Grommet (C7AZ-6892)
i am not sure any of these places are for real so watch out
#6
^ Wrong grommet and invalid Ford part number. It's C7AZ-6A892-A 1967 F100/350 352 / 1967 Mustang/Cougar 390.
How many would'ja like since it's available from Ford?
E7AZ-6A892-A (replaced E5TZ-6A892-B & C8SZ-6A892-A & B) .. Smog Valve to Valve Cover Grommet.
Applications: 1968/76 F100/350 360/390 / And myriad other applications from 1968 into the 1990's.
MSRP: $5.06 // FTE sponsor horizonpartsguy.com price: $3.64 (Horizon Ford-Seattle WA, formerly partsguyed.com).
Be careful when buying, cuz there's a different grommet (C8AZ-6A892-A) that fits into the hole in the oil cap that the plastic elbow (C8AZ-6767-A) fits into.
E7AZ-6A892-A (replaced E5TZ-6A892-B & C8SZ-6A892-A & B) .. Smog Valve to Valve Cover Grommet.
Applications: 1968/76 F100/350 360/390 / And myriad other applications from 1968 into the 1990's.
MSRP: $5.06 // FTE sponsor horizonpartsguy.com price: $3.64 (Horizon Ford-Seattle WA, formerly partsguyed.com).
Be careful when buying, cuz there's a different grommet (C8AZ-6A892-A) that fits into the hole in the oil cap that the plastic elbow (C8AZ-6767-A) fits into.
Thread
Thread Starter
Forum
Replies
Last Post