Cruise control intermittant
Thread Starter
|
New User
Joined: Mar 2011
Posts: 5
Likes: 0
From: Southeastern Ontario
Cruise control intermittant
2008 Ford F250 Super Duty 6.4 PSD A/T Cruise control stops working. Keeps giving a DTC P0703: B00
I clear the code, (with Banks IQ) shut engine off and restart and then usually good for 2-3 and sometimes 7-8 brake pedal applications and cruise stops working again. Same code again. <O
></O>Brake switch at the pedal has been replaced and the Banks “Speed Brake” has been disconnected.<O
></O>Any ideas? I saw a thread a while ago about the sensor at the lower frt of the master cyl possible causing this issue but can't find the tread any longer?<O
></O>
Last edited by Tia Maria; Apr 4, 2012 at 09:18 AM. Reason: Update
Thread
Thread Starter
Forum
Replies
Last Post
Larboy
6.4L Power Stroke Diesel
6
Apr 18, 2017 09:21 PM
