wheels in question
Thread Starter
|
Freshman User
Joined: Feb 2012
Posts: 47
Likes: 0
wheels in question
Can people show off some Wheels and tires? with specs please!(wheel size width offset backspace, tires size if possible and if a spacer was used!!) i would like to see un tubbed and unwidend fenders please!
oh and if you have suspension drops i would like to know that aswell!
oh and if you have suspension drops i would like to know that aswell!
Cargo Master
Joined: Sep 2010
Posts: 3,427
Likes: 48
From: Hot AZ (Phoenix Valley)
Here is your first...
49 ford f1
P/O lowered front end by removing some of the front springs. Stock rear springs. No Tub Stock fenders
First Pic stock F100 15x6 wheels 5x5.5 outside nips for dish hubcaps, 225/70R15 Fronts 275/60R15 rears
Second pic is Fronts Ford 15x7 wheels (holes) 5x5.5 outside nips for hubcaps, with 225/70R15. Rears Dodge 16x7 wheels (holes) 5x5.5 no nips for hubcaps, with 235/75R16
49 ford f1
P/O lowered front end by removing some of the front springs. Stock rear springs. No Tub Stock fenders
First Pic stock F100 15x6 wheels 5x5.5 outside nips for dish hubcaps, 225/70R15 Fronts 275/60R15 rears
Second pic is Fronts Ford 15x7 wheels (holes) 5x5.5 outside nips for hubcaps, with 225/70R15. Rears Dodge 16x7 wheels (holes) 5x5.5 no nips for hubcaps, with 235/75R16
Lead Driver
Joined: Apr 2002
Posts: 8,813
Likes: 13
From: Littleton, New Hampshire
Here's my 48 F-3 converted to F-1. Wheels are 15x6 Chrysler from an 87 Chrysler 5th Avenue with 3.5 inch backspace, tires are 225:75/R15's all around and hubcaps are 57 Cadillac. Front suspension is 87 Chrysler torsion bar and rear end and springs is 87 Chrysler 5th Avenue...no spacers! 
Cargo Master
Joined: Sep 2010
Posts: 3,427
Likes: 48
From: Hot AZ (Phoenix Valley)
I have a set of slotted D mags that will be on the truck once I can afford some rear tires for them...
Thread
Thread Starter
Forum
Replies
Last Post
