Help wiring bucket seats
Thread Starter
|
Cross-Country
Joined: Mar 2010
Posts: 88
Likes: 12
Help wiring bucket seats
I have an 08 f450 with a bench seat that I want to replace with the 2 bucket seats with the fold down center consel. The replacement seats have the wiring in tact with the wires cut before the factory harness so I still havew those. The question is what do I power them to on the Drivers side I have 2 wires a black (ground) and a Black with white line (power?) I tried hooking it up to battery to test motor and Ihave nothing. On the passenger side I have 3 wires a black a green and a black with a green stripe. Any advice on how to wire these seats to make them work.
Elder User
Joined: Aug 2006
Posts: 557
Likes: 1
From: Bristol, CT
I have an 08 f450 with a bench seat that I want to replace with the 2 bucket seats with the fold down center consel. The replacement seats have the wiring in tact with the wires cut before the factory harness so I still havew those. The question is what do I power them to on the Drivers side I have 2 wires a black (ground) and a Black with white line (power?) I tried hooking it up to battery to test motor and Ihave nothing. On the passenger side I have 3 wires a black a green and a black with a green stripe. Any advice on how to wire these seats to make them work.
Elder User
Joined: Aug 2006
Posts: 557
Likes: 1
From: Bristol, CT
If you give me a day or two ( Snow is coming to new england and I don't know when i'll be in front of the computer next) I'll dig you the shop wiring book and email you the pages. Just post me your email address.
Elder User
Joined: Aug 2006
Posts: 557
Likes: 1
From: Bristol, CT
Ok, found myself the time right now to do it and just remember that you'll need an SVG viewer, try that link below.
http://www.google.com/url?sa=t&rct=j...lD8RrplaSiEfeg
http://www.google.com/url?sa=t&rct=j...lD8RrplaSiEfeg
Thread
Thread Starter
Forum
Replies
Last Post
darkjedi351
1999 - 2016 Super Duty
28
Mar 18, 2019 11:27 PM
