need help asap
Thread Starter
|
Senior User
Joined: Feb 2009
Posts: 157
Likes: 0
From: Duanesburg, NY
need help asap
im freaking out my clutch fork and pivot ball/pin went out the other day and the dealer says the pivot ball was obsolete and not available....anybody have any clue if there is another place i can get one none of the parts stores can is there an after markt one? his is my only vehicle so i need it back asap? any thoughts is appreciated thanks!
Post Fiend
Joined: Dec 2009
Posts: 15,505
Likes: 18
From: Livoina,La
Thread Starter
|
Senior User
Joined: Feb 2009
Posts: 157
Likes: 0
From: Duanesburg, NY
Thanks do the replies sorry it's been awake since I replied it's been a hectic week my cousin ended up havin one out of luck I do have one more question though I just had a valair organic 400 horse clutch put in and now that I finnaly got it back today I noticed that the clutch pedal is real easy and when my foot is of the clutch a noise comes from the tranny.... Is that normal with that type of clutch or no? If not what could it be? I plan on bringing it back to where it was installed tomorrow after I get outta school but it just don't seem right to me... Tranny was overhauled mabe a year and a Half ago with new input shaft and now the new clutch.... Any thoughts? Thanks!
Tuned
Joined: Feb 2005
Posts: 368
Likes: 1
From: Berwick, PA
Thanks do the replies sorry it's been awake since I replied it's been a hectic week my cousin ended up havin one out of luck I do have one more question though I just had a valair organic 400 horse clutch put in and now that I finnaly got it back today I noticed that the clutch pedal is real easy and when my foot is of the clutch a noise comes from the tranny.... Is that normal with that type of clutch or no? If not what could it be? I plan on bringing it back to where it was installed tomorrow after I get outta school but it just don't seem right to me... Tranny was overhauled mabe a year and a Half ago with new input shaft and now the new clutch.... Any thoughts? Thanks!
Trending Topics
Thread Starter
|
Senior User
Joined: Feb 2009
Posts: 157
Likes: 0
From: Duanesburg, NY
I forgt to add it does it when going down the road too is that still gear roll over? I didnt realize the dual mass did that much silencing lol
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Thread Starter
|
Senior User
Joined: Feb 2009
Posts: 157
Likes: 0
From: Duanesburg, NY
Yup that answered them lol and thanks I have to upload a newer photo it's got stacks on the outside of the bed (some people like some hate but i don't give a #%*# lol) I like them and a different Lightbar and running lights/ turnsignals under my mirrors I'll up load a new one this weekend.... Ur trucks nice aswell.... Almost the same as mine right down to the miles lol
Tuned
Joined: Feb 2005
Posts: 368
Likes: 1
From: Berwick, PA
Yup that answered them lol and thanks I have to upload a newer photo it's got stacks on the outside of the bed (some people like some hate but i don't give a #%*# lol) I like them and a different Lightbar and running lights/ turnsignals under my mirrors I'll up load a new one this weekend.... Ur trucks nice aswell.... Almost the same as mine right down to the miles lol
Thread Starter
|
Senior User
Joined: Feb 2009
Posts: 157
Likes: 0
From: Duanesburg, NY
Ok so it might be just me being paranoid that something is wrong but I noticed tonight while driving home only the 2nd time I've drivin it since the install that the noise that I'm hearing while driving goes away after I push the clutch in just a little bit.... But the clutch is still engaged cause I can accelerate still..... And it goes away while coasting.... It sounds like 2 pieces of paper rubbing together.... Is it still gear rollover or does this sound like something different? Again sorry for freaking out I just can't have my truck down anymore!
Senior User
Joined: Apr 2011
Posts: 305
Likes: 0
From: Idaho
Hey i have the same exact issue goin on, its somethin to do with the throw out bearing. And my clutch is also very easy to depress nothing like my other psd. If I barely depress the clutch it goes away. I hate the thought of pullin the tranny but I will to figure out the noise. Ill try to stay in touch.
Hotshot
Joined: Oct 2003
Posts: 17,799
Likes: 104
From: Ashland City, TN
Hey i have the same exact issue goin on, its somethin to do with the throw out bearing. And my clutch is also very easy to depress nothing like my other psd. If I barely depress the clutch it goes away. I hate the thought of pullin the tranny but I will to figure out the noise. Ill try to stay in touch.