after upgrading fuel puel
Thread Starter
|
New User
Joined: Jan 2012
Posts: 7
Likes: 0
From: vass,nc
after upgrading fuel puel
I took the factory fuel pump and filter off and replaced it with a airdog 2 but I turned it wide open but it didn't not throw any black smoke and im not looking to throw smoke just want the right amount of fuel going in. Don't know if I have an injector going bad or the high pressure oil pump is going out.
Postmaster
Joined: Jul 2011
Posts: 3,263
Likes: 0
From: Houston, TX
i've heard bout folks who have had probs using tat airdog 2. if oil is getting to ur injectors, then ur gonna throw black smoke.
wat symptoms do u have? wat year of truck? the guys will chime in and help u out but we need some details as well. did u get it scanned for codes yet?
wat symptoms do u have? wat year of truck? the guys will chime in and help u out but we need some details as well. did u get it scanned for codes yet?
Thread Starter
|
New User
Joined: Jan 2012
Posts: 7
Likes: 0
From: vass,nc
I have a 06 6.0 f250 on first start up it smokes a blue haze but the fuel pressure is set at 70 psi. I have a stage 2 cold air intake, chip, and 4" exhaust just so u know what has been done so far. I also had to replace one injector 2 months ago it went completely out. I just trying to get it on the track and put on a good show and show ppl 6.0 are power houses its just really costly. And ever so often a weird vibration comes through the floor board.
Thread
Thread Starter
Forum
Replies
Last Post
JPdiesel
6.0L Power Stroke Diesel
8
Mar 2, 2012 01:51 PM
EMD_DRIVER
1999 - 2003 7.3L Power Stroke Diesel
28
Apr 19, 2011 08:57 PM
ryans10pointer
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
2
Sep 8, 2006 08:48 PM
