Ya for some reason Supermotors my hosting site has started triggering a warning .... anyway,,,

Whats a good 8 lug HD 44 worth then?

 

Because this site is the go to for bang on info .... heres 3 more axle decode requests... last ones a late 77 front. <br/> Thanks

 

Ford: ED D6TA-AAE / Dana: 610005-1R

Dana 44-6CF Front Driving Axle; 4.09-1; Free Running Hubs; No Limited Slip; 3,500 lbs. Front Axle Capacity.
--------------------------------------------------------------------------------------------------------------------------
Ford: D6TA-FAB / Dana: 603715-20

Dana 60 Rear Axle; 3.54-1; No Limited Slip; 5,300 lbs. Rear Axle Capacity.
------------------------------------------------------------------------------------
Ford: D6TA-GEB / Dana: 603717-11

Dana 60 Rear Axle; 4.10-1; No Limited Slip; 5,300 lbs. Raer Axle Capacity.

 

As always ...Thanks again Bill !

 

An older thread, but as good a place as any to shed some light on this rear axle from a '77 F250

Is it just me, or is it odd to find a 3/4 ton work truck with a 3.07 axle ratio? Seems like alotta gear, even with a 460.
Maybe not, as I've seen a few 460 powered F-150's with 2.75's

Top row 3.07 D6TA KAA

Second row C03714 1

 

hello, ive got a 1985 f250 6.9 idi, i am trying to figure out what front axle i have,
the axle code i am getting is 3 54 (gear ratio)
E5TA ***
and along the bottom is stamped
60?0232 - *
theres a few letters/numbers im missing but i cant make it out. anyway you could help me identify it?
rear originally had the 10.25 sterling which has since been replaced, just like to know a little more about the front.
thanks,
ashley

85 F250 6.9 IDI