The drivers rear door on my 06 supercab is somehow misaligned. The gap between the door itself and the cab (looking at it from the side) is about 3/16 to 3/8 at the top and a 1/4 at the bottom. The gap between the front door and rear door at the top is under an 1/8 at the top and over a 1/4 at the bottom (it almost hits). The front door to fender gap looks fine. The door has no rattles but does have a little wind noise. Is there an adjustment for this? I've read through all the "rattling door" posts about adjusting in and out but I cant find an answer on adjusting the door vertically. The hinge pins dont seem to be worn - the truck has 74000 miles. Any help is appreciated.