63 Unibody Big Window on 2003 Marauder Chassis
#47
Driveshaft alignment
I thought I would post a few pics of this build I just finished after two years. I bought a wrecked 2003 Marauder and took the body off the frame. I really just wanted the motor and trans which is the 4 valve cobra motor. After looking at the chassis, I thought it woudl be a shame to separate the engine and trans so I started looking around for some Ford with a wide track. Turns out the short bed Unibody was the same wheelbase and the wide Panther chassis fit underneath it after a little massaging. So any Panther chassis like a police car crown vic or the Mercury version could work as a complete foundation for a 61-66 short bed truck. You get the modern chassis and fuel injected motor and electronic trans, 4 link air bag rear with watts linkage, etc. if anybody has any quesitions on this build, let me know. It rides great Karl
#48
Hi Karl, just wondering how the engine, transmission, driveshaft and rear-end align in these cars? I'm working on one now and the tailshaft and pinon are at opposing angles. Not vertical but like the transmission tail was moved to the drivers side. Very strange. Thanks for any help you can provide. Andy
Thread
Thread Starter
Forum
Replies
Last Post
peakster
1961 - 1966 F-100 & Larger F-Series Trucks
3
02-04-2016 11:20 PM
havi
1948 - 1956 F1, F100 & Larger F-Series Trucks
47
10-01-2011 03:24 PM
stroken
1999 - 2003 7.3L Power Stroke Diesel
2
07-24-2009 05:09 AM