Will it fit ?
Thread Starter
|
New User
Joined: May 2009
Posts: 17
Likes: 0
Will it fit ?
I am looking for a correct automatic trans, bell housing, flexplate, torque convertor to put my 1956 F100 back to stock (it has a 272/292 engine). Found a 1957 car set up - will that fit?
Thanks !
Thanks !
See A Man About A Horse
Joined: Apr 2003
Posts: 4,936
Likes: 699
From: Mariposa, Ca.
I believe there's a different bell housing for trucks which has ears for the mounts.You might want to ask this in the Y-block forum of FTE,for a more specific answer.Good luck,Steve.
Posting Guru
Joined: Jul 2007
Posts: 2,344
Likes: 11
From: I live in Leitchfield, KY
I dont know about the bellhousing mounts being different and all for the mount? But what I do know is the bell crank for the shifting of them things is a pain in the butt to get adjusted right. My mom had a '56 Ford convertible and it had a 312 Y block in it with a Fordimatic in it and I had a terrible time getting that thing adjusted. Make sure you get all that linkage when you get the transmission. It bolts to the rear of the intake and has little rods that attach to the carb and to the gas pedal and then it goes down to the transmission. It is similar to modern TV cables on Overdrive transmissions and just about as aggrivating to adjust. Even if the bellhousing on the cars is different you can fab up a different rear crossmember though that shouldnt be a problem.
I had heard that they had started making a kit to put a modern automatic trans to the Yblocks, I'm not sure if that's true or not? Or if its something you'd even be interested in doing but you might? Good luck dude.
I had heard that they had started making a kit to put a modern automatic trans to the Yblocks, I'm not sure if that's true or not? Or if its something you'd even be interested in doing but you might? Good luck dude.
Thread
Thread Starter
Forum
Replies
Last Post
DDeffes
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
8
Mar 5, 2015 08:57 PM
f100swe
1948 - 1956 F1, F100 & Larger F-Series Trucks
8
Feb 10, 2009 02:53 PM
61Rat
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
3
Mar 3, 2008 07:59 PM
darkhorse54
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
Feb 10, 2002 04:28 PM
