N351 heads
Thread Starter
|
Senior User
Joined: Aug 2009
Posts: 236
Likes: 1
N351 heads
I just picked up a set of N351 heads at a yard sale for $300 complete with rockers
they have some minor damage on them, SO my questions go like this
Does anyone know how far they can be milled on the deck surface?
How can i tell if they are early or late castings?
(i know they are more or less the same, but it does matter to me)
they have some minor damage on them, SO my questions go like this
Does anyone know how far they can be milled on the deck surface?
How can i tell if they are early or late castings?
(i know they are more or less the same, but it does matter to me)
Postmaster
Joined: Mar 2005
Posts: 2,949
Likes: 6
From: Earth
https://www.speedwaymotors.com/images/PDF/910-14351.pdf
Let the machine shop tell you how much can safely be milled.
Let the machine shop tell you how much can safely be milled.
Thread
Thread Starter
Forum
Replies
Last Post
Jrock909
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
3
Feb 8, 2007 10:59 PM
