When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I currently have a set of warn manual locking hubs here on the shelf, which are still installed in the rotors.
BTW - even once you replace the bull crap auto hubs, they just might not be the problem. U-joints have a tendancy to create havoc on these rigs, .
Would you be intersted in parting with the hubs befor they make it to the scrap yard?
The u-joints crossed my mind as the culprit but I decided to eliminate the parts one at a time from the outside in... As soon as I removed both hubs all the issues went away. Leads me to believe the hubs are the problem. Or am I missing something?
Would you be intersted in parting with the hubs befor they make it to the scrap yard?
The u-joints crossed my mind as the culprit but I decided to eliminate the parts one at a time from the outside in... As soon as I removed both hubs all the issues went away. Leads me to believe the hubs are the problem. Or am I missing something?
best bet would be to pm him about it. the mods let a lot of stuff slide in here, but they still frown upon open selling in the forum
the problem is if we let it happen once, then we get the "but you let him sell/buy, why can't i" whining.
so it is easier to just keep it all in either the classifieds, or pm's.
the problem is if we let it happen once, then we get the "but you let him sell/buy, why can't i" whining.
so it is easier to just keep it all in either the classifieds, or pm's.
you shahddup old man! i moderate this forum
ninja style, we just want folks to think you are in control