2011 door lock key pad

Reply Subscribe

Thread Tools

Search this Thread

Aug 7, 2011 | 01:31 PM

timhemm

Thread Starter

New User

Joined: May 2002

Posts: 12

Likes: 0

2011 door lock key pad

I have a 2011 SD with electric locks and remote key fobs but no key pad. Anyone have information about installing one/cost/source? Had one on last truck and really miss it. Thanks for any info.

Aug 7, 2011 | 02:12 PM

kd0axs

Cargo Master

Joined: Jul 2011

Posts: 2,000

Likes: 4

From: Nowthen, MN

They make a wireless keypad that just sticks on the outside of your door. Basically does the same thing as your key fob, but you have to enter the code.

Aug 7, 2011 | 02:17 PM

kd0axs

Cargo Master

Joined: Jul 2011

Posts: 2,000

Likes: 4

From: Nowthen, MN

Just did a quick search on eBay and found this one. They might have them at your local dealer but probably much more expensive.

http://cgi.ebay.com/ebaymotors/DOOR-...Q5fAccessories

Aug 8, 2011 | 04:43 AM

hd1937

Junior User

Joined: May 2011

Posts: 63

Likes: 7

From: NW PA

Ford has them for anything with remote entry locks. Price?

Jim

Aug 8, 2011 | 05:54 AM

PROxac

New User

Joined: Dec 2007

Posts: 24

Likes: 0

From: Decatur

Quote:

Originally Posted by kd0axs

Just did a quick search on eBay and found this one. They might have them at your local dealer but probably much more expensive.

DOOR LOCK KEYLESS ENTRY KEYPAD 06-2011 F250/F350 FORD | eBay

I am waiting on a couple of these to arrive myself. I will post once they do and I get them installed.

Aug 8, 2011 | 03:57 PM

PROxac

New User

Joined: Dec 2007

Posts: 24

Likes: 0

From: Decatur

Mine arrived, have been programmed, and installed. No problems.
I got mine off eBay from columbia-ford-kia btw. They shipped fast and were packaged very well. A+

Aug 15, 2011 | 01:29 PM

timhemm

Thread Starter

New User

Joined: May 2002

Posts: 12

Likes: 0

install keypad 2011 f250--How?

Just received my key pad, purchased on ebay. A question about the instructions which (to me) are a bit unclear. I'm putting this on a 2011 f250 xl...has power door locks with the IKT (integrated keyhead transmitters) In the instructions it says "you don't need all ikt's to program the rf keypad to your vehicle...going further down instructions it talks about pushing any button on fob 1 and fob 2...since mine has no fobs I'm guessing I just have to do the key in the ignition, cycling of the keys, push 7/8 9/0 buttons and I'm done. I hope this makes sense to one of you who have done this already. I'm guessing that the instructions are the same pages from all the suppliers. Any help you could give me on this would be appreciated, as I don't want to have to go through this programming business multiple times. Thanks much.