Question about back-up sensors?
Thread Starter
|
Junior User
Joined: Apr 2011
Posts: 59
Likes: 0
From: clearwater,FL
Question about back-up sensors?
I have a 04 lariat F350, not that I use them but I like everything to work correctly in my truck. Today will I was working I started my truck and noticed that the off indicator was lite, which we all know that is the opposite of the factory settings. When I push the button it does nothing just stays in the off position? what could be the problem? I purchased the truck used and do not have a diagram for the fuse box, could it be a fuse? HELP!!!!
Fulltime INFIDEL!
Joined: Jul 2010
Posts: 252
Likes: 0
From: Down South
Crawl under the rear bumper and make sure all your harnesses are connected at the sensors. If they are, trace the harness to a main connector that should be up around the spare, or the receiver hitch. They all neck down into one connection. If everything is connected, you have a bad sensor. It's not talking to the truck.
You didn't back into a pole by accident because the music was too loud and you were looking out the side view, did you? Not that I've done that...
You didn't back into a pole by accident because the music was too loud and you were looking out the side view, did you? Not that I've done that...
Thread
Thread Starter
Forum
Replies
Last Post
740steve
Explorer, Sport Trac, Mountaineer & Aviator
2
Aug 22, 2013 03:24 PM
