Does anyone know if a front roll pan is available for 1961 - 1966 F100? Several suppliers have them for 1950's versions. I'd like to remove the <a href="http://www.motorhaven.com/">bumper</a>, trim back the frame rails and fill with a steel or 'glass roll pan.

 

Never seen one, BUT the F-350 (also 4x4's) and up trucks had a steel panel simular to what your lookin for. It's still cut out in the middle for the frame, but it comes down a lot further on the ends. All the way down to the bottom of the fender. I'm not much of a keyboard artist, but it kinda looks like this.


---------------------------------------
______['''''''''''''''''''''''''''''']______

Good luck, Phil

 

Thanks, I'll do some checking into that F350 panel idea.

 

There is in fact a part like that . The part number is C3TZ-8188-A. I had to find one for the restoration of my 1965 f-350. It was not an easy find but they are out there somewhere. Good luck

 

I saw several of them at Pigeon Forge last year, but guys were asking upwards of $150 for em! I ended up getting one thru the FTE classifieds for a lot less. I have a picture of one if you'd like to see it drop me a line.



Good luck,