I have a 79 Ranger XLT,460 and C6.I am looking for the cruise control servo.Junk yards around here don't have any.Anybody know where I can find one?Either a used or a new one.
Thanks

 

Me too. But I haven't checked the wrecking yards yet.

 

You want the whole thing?

 

I am parting out a 79 bronco with the Ford aftermarket cruise control. It has the whole servo part bolted to the intake manifold, 351M 2 bbl, the black box under the dash and the turning signial lever on/off part.

PM with me interest.

 

I've got a factory Ford servo that I believe works, I have no way to test, if anyone needs if just pm me and pay small shipping and its yours.

 

D6UZ-9C735-A (replaced: D3SZ-9C735-A, D4SZ-9C735-A, D5SZ-9C735-A & B) .. Cruise Control (C/C) Servo-Use with factory installed C/C only / Obsolete

Last MSRP: $208.37 / Dealer net cost: $125.02 / Applications:

1975/79 F100/350 460 / 1977/79 F100/350 351M/400 / 1978/79 Bronco // 1976/79 Econoline 351W/460 // 1973/76 Thunderbird/Town Car/Mark IV / 1974 Torino/Montego 460 with T/E (smog pump).

1976/79 Granada/Monarch I-6 & V8 / 1977/79 Thunderbird/Ranchero/Cougar/LTD II 302 (not LTD!) / 1977/79 Town Car/Mark V 400/460 / 1977/79 Lincoln Versailles 302/351W.

D6UZ-9C735-A =

COLLECTORS AUTO SUPPLY in Oroville WA has 1 = 800-414-4462.
---------------------------------------------------------------
D3SZ-9C735-A (no prices listed on Fords parts locator system) =

LINCOLN-MERCURY OLD PARTS STORE in Clearwater FL has 1 = 727-445-7551.

WESLEY OBSOLETE PARTS in Liberty KY has 3 = 606-787-5293.

GREEN SALES CO. in Cincinnati OH has 39 = 800-543-4959.

Note: The switches for factory C/C mount into the horn pad. Dealer installed switch (one unit) mounts on the turn signal handle.

If a 1977/79 Passenger Car, 1978/79 F100/350, Bronco, Econoline has the optional 3 spoke "Sport" Steering Wheel, the dealer installed C/C kit is used.