1964 needing help!!
Thread Starter
|
New User
Joined: May 2011
Posts: 8
Likes: 0
1964 needing help!!
Hello everyone. I'm new to all of this and I'm looking for some help. I've been able to find most of what I'm looking for for my 64 F100 that I just recently bought, and recently started learning about. Way behind the power curve. I've seen a few beautiful early sixties F100s with the kick panel trim just above the step. I love it but I can't find it any place except for a guy that will make them for $250. Any help would be appreciated. I'm infatuated with these things. I think they really look good.
Senior User
Joined: Mar 2011
Posts: 251
Likes: 0
door sill plate
are you talking about the alum. trim that goes across the door opening at the edge of the floor mate. if so lmc and denis carpenter has them listed for 65 66 f100 don't know if they will work for you.
Post Fiend
Joined: Nov 2000
Posts: 6,060
Likes: 7
From: Glendale Arizona
250 is cheap for how they are actually made.
If you want a stock pair look to larger trucks T N and F series as they were used to keep the floor mat in place. The nice billet ones you see are from the same source and made to order.
Garbz
If you want a stock pair look to larger trucks T N and F series as they were used to keep the floor mat in place. The nice billet ones you see are from the same source and made to order.
Garbz
Logistics Pro
Joined: Dec 2004
Posts: 4,651
Likes: 60
From: Hemet ca.
Used ones can be as cheap as $50.00 or as much as $300.00 on ebay
All depends who has them, did they recondition them re-polish them or what? They're out there you just have to keep looking.
Postmaster
Joined: Mar 2004
Posts: 4,375
Likes: 5
From: seattle
I have some of these pieces...if you are doing a restoration these would definately need work...but show fair enough for a driver...and loads less then 250 for the pair!!!
post email if interested and I can email pics.
- cs65
post email if interested and I can email pics.
- cs65
Thread Starter
|
New User
Joined: May 2011
Posts: 8
Likes: 0
That would be great if you could email me some of your pics. Thanks a lot for the help. mjbeals125@yahoo.com
Trending Topics
Thread Starter
|
New User
Joined: May 2011
Posts: 8
Likes: 0
Flashback F100's - New Products This page has new parts that have just come on the market
Thanks everyone for the help.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Post Fiend
Joined: Nov 2000
Posts: 6,060
Likes: 7
From: Glendale Arizona
The trim Tom sells is produced by "needmoretime" a member here. Wayne also reproduced the door pocket trim in Billet. Rick from Carolina also picked them up to sell.
They look good as they are CNC Billet. That is why they cost so much.
They were prototyped from one of my rust free trucks.
Garbz
They look good as they are CNC Billet. That is why they cost so much.
They were prototyped from one of my rust free trucks.
Garbz
Thread
Thread Starter
Forum
Replies
Last Post
Townson
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
5
Sep 21, 2011 08:46 PM