the u-joints seem to be fine, so I'm not replacing them. absolutely no wiggle in them at all.

 

xrf fan here too. Great product!

 

Dana-spicer designed for and built by the manufacturer of your drive axel anything else is reverse engineered to fit!

 

I completed the install 06/18/11. New XRF ball joints, seals, and o-rings. Greased the bearings while I was there. Took about 12 to 14 hours total. If you have the tools, you can accomplish this task. Drove it 06/19/11, no problems. Probably still need to have the alignment checked. I appreciate all the input from each one of you!