. 
May, 2011 Junk Yard Wishlist
Thread Starter
|
Moderator
Joined: Nov 2007
Posts: 22,415
Likes: 92
From: Denver Metro Area, CO
May, 2011 Junk Yard Wishlist
This was a neat idea, thanks again to whoever suggested this! 
Last month's will be unstuck and will fade away, I guess I could probably close it.
Post your wants & needs here, even if they were on last month's list; there's enough chatter on the old one it gets hard to know if somebody is still needing a part or not without reading through the entire thing.
Have to ask you guys to adhere to an FTE guideline I wasn't aware of but has been talked about amongst the mods & admins recently....
==> Please don't post prices <==
It's fine if we want to give/sell things to each other but we can't be running a Flea Market or Auction House here, that doesn't go over well with the admins. Thanks!
Last month's will be unstuck and will fade away, I guess I could probably close it.
Post your wants & needs here, even if they were on last month's list; there's enough chatter on the old one it gets hard to know if somebody is still needing a part or not without reading through the entire thing.
Have to ask you guys to adhere to an FTE guideline I wasn't aware of but has been talked about amongst the mods & admins recently....
It's fine if we want to give/sell things to each other but we can't be running a Flea Market or Auction House here, that doesn't go over well with the admins. Thanks!
Cargo Master
Joined: Nov 2010
Posts: 3,244
Likes: 40
Hey guys I need a black rearview mirror that is non cracked. I also need a set of western style I believe swing out mirrors. They slide out on the top of the mirror housing. I was curious as to if I could remove the lense and busted it out, so I gotta get them powdercoated anyway.
Elder User
Joined: Aug 2004
Posts: 725
Likes: 0
From: New Lexington, Ohio
Still need a ps pump bracket from an efi 460 van (Saginaw ps pump). Believe it has to be efi because it's a cast aluminum bracket. Also serpentine drive. Don't NEED the pump, but wouldn't hurt, either
Lead Driver
Joined: Jul 2009
Posts: 6,477
Likes: 19
From: Sheffield, AL
4000 RPM factory tachometer from a 1980-1996(?) F600... some were 3750 RPM, I believe.
Trending Topics
Senior User
Joined: Jan 2011
Posts: 205
Likes: 0
From: Richmond, VA
Hey guys,
I need (2) '86 F350 fender emblems.
Thanks,
Lamar
I need (2) '86 F350 fender emblems.
Thanks,
Lamar
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Thread Starter
|
Moderator
Joined: Nov 2007
Posts: 22,415
Likes: 92
From: Denver Metro Area, CO
There's somebody else out here looking for a 4V intake, I found one in a van last weekend but I'm not sure if it's a 302 or 351W.
And I got to thinking to myself... man, *that* is gonna suck to take off. I won't be *that* bad if I can get the engine cover entirely off, but there are all kinds of hoses and crap in a fairly confined space.
But the real issue comes with shipping... are you aware that Ford's cast-iron intakes weigh something around 75 lbs.? It'll take a mini-crate to ship such a thing, and I'd guess at least $50 in shipping costs....
And I got to thinking to myself... man, *that* is gonna suck to take off. I won't be *that* bad if I can get the engine cover entirely off, but there are all kinds of hoses and crap in a fairly confined space.
But the real issue comes with shipping... are you aware that Ford's cast-iron intakes weigh something around 75 lbs.? It'll take a mini-crate to ship such a thing, and I'd guess at least $50 in shipping costs....
Thread Starter
|
Moderator
Joined: Nov 2007
Posts: 22,415
Likes: 92
From: Denver Metro Area, CO