fuel injected control module
Thread Starter
|
New User
Joined: Jan 2011
Posts: 16
Likes: 0
From: Gray Georgia
fuel injected control module
My f.i.c.m. drives are about shot I 'm wondering if I can use a used f.i.c.m. On cold starts it is terrible I plug it in it would start better but it seems to be getting harder & harder to start. can I use a used f.i.c.m. & would it have to be reprogramed to my truck also where could i find one also ford said if i could find a refurbised one only ford can program it is this true
Last edited by manamal 60/f350; Apr 17, 2011 at 10:39 AM. Reason: spelled wrong my bad
Senior User
Joined: Jan 2005
Posts: 373
Likes: 2
From: Alberta, Canada
You can use a refurb. or used FICM. Techs on here have stated its a little better to have the replacement FICM "married" to the PCM in the truck by Ford.
But it will work just fine if you use a used FICM and see if you have rectified your situation.
But it will work just fine if you use a used FICM and see if you have rectified your situation.
Thread
Thread Starter
Forum
Replies
Last Post
tonefordays
6.0L Power Stroke Diesel
17
Mar 31, 2012 11:39 AM
cabinman
6.0L Power Stroke Diesel
4
Oct 23, 2009 04:52 AM
