EFI Fuel return line
Thread Starter
|
Junior User
Joined: Sep 2004
Posts: 94
Likes: 0
From: san francisco
EFI Fuel return line
My fuel return line from the pressure regulator to the fire wall (about 3 feet long) was broken during the disassembly and I need to replace it. I was wondering if it needs to be a high pressure line like the inlet or can I use good hose and hose clamps to clamp it to the regulator. Thanks
Elder User
Joined: Nov 2008
Posts: 668
Likes: 6
From: Northfield, MI
I wouldn't use low pressure line on the return side for the fact that if the return line ever got restricted, from a kinked line or a rock hitting a line and crushing it, the low pressure hose could burst and spray fuel all over the engine compartment.
For a few bucks more I would just use the proper hose, and double clamp each end.
For a few bucks more I would just use the proper hose, and double clamp each end.
Thread
Thread Starter
Forum
Replies
Last Post
whitesdford
1999 - 2003 7.3L Power Stroke Diesel
3
Dec 1, 2009 06:59 AM
JefFZ6
1983 - 2012 Ranger & B-Series
63
Aug 21, 2008 08:54 PM
