upgrading seating
Thread Starter
|
Super Moderator
Joined: Oct 2002
Posts: 8,547
Likes: 6
From: MA
upgrading seating
I wont lie, Im less than impressed with the stock bolstering of the EB seats. I like to drive my truck, but get discouraged when the only thing holding me in my seat is the arm rest and door. Anyone upgrade their seating? I have a rather large upper body, and I have yet to find a good seat with wide bolsters that dont make my back feel like crap. How do these look? http://cgi.ebay.com/ebaymotors/ws/eB...category=33701 I was just searching for stuff for the bronc, and stumbled upon this. Id like to hear what anyone else has done with their seats. Im not looking for anything crazy, just something to hold me snug while taking a corner at 75 
j/k. Hope to hear from you guys
Rich
j/k. Hope to hear from you guysRich
Senior User
Joined: Jan 2002
Posts: 125
Likes: 0
From: Edison NJ
upgrading seating
I took the drivers seat from a 1997 Expedition EB. Had to have custom brackets bars made to make it fit, but it did fit. The power seat plug on the Exp. seat was the same plug on my Bronco for the back bag.
It looks a little funny b/c I couldn't use the passenger seat from the Exp. because the rails don't slide for anyone to get in the back. Also, the Exp seat sits anput 2-3 inches taller than the stock seat.
Hope this helps a little
Mike
It looks a little funny b/c I couldn't use the passenger seat from the Exp. because the rails don't slide for anyone to get in the back. Also, the Exp seat sits anput 2-3 inches taller than the stock seat.
Hope this helps a little
Mike
