Transmission build for 00' F-250
#1
Transmission build for 00' F-250
Hey guys thanks in advance for any helpful info I can get here, I'm new to this site, but I've found lots of useful info already.
On to the issue.... I'm having my 4R100 rebuilt by a local trans guy. I'm looking to get it built up to pull, (I do quite a bit of towing these days for business and pleasure). I want to know what all I should have done to make it right. I know the easy answer is have John Woods or BTS or Sun Coast do the work, but I just don't have $5000 to put into it.
What I understand I need to focus on is;
Torque Converter- triple clutch and billet housing
Steel Planetary gears
cooling system
I'm also wondering if there is other recommended "maintenance" I should do while I have the trans out.
Thanks again for any help!
Chris
On to the issue.... I'm having my 4R100 rebuilt by a local trans guy. I'm looking to get it built up to pull, (I do quite a bit of towing these days for business and pleasure). I want to know what all I should have done to make it right. I know the easy answer is have John Woods or BTS or Sun Coast do the work, but I just don't have $5000 to put into it.
What I understand I need to focus on is;
Torque Converter- triple clutch and billet housing
Steel Planetary gears
cooling system
I'm also wondering if there is other recommended "maintenance" I should do while I have the trans out.
Thanks again for any help!
Chris
#2
#4
Thread
Thread Starter
Forum
Replies
Last Post
smdenlinger
1999 - 2003 7.3L Power Stroke Diesel
25
04-14-2008 03:55 PM