help figuring out transmission
FTE Chapter Leader
Joined: May 2009
Posts: 8,843
Likes: 27
From: Eastern Ky
Sounds like a M5OD......The clutch/Pressure Plate/Throwout Bearing kit will run around $150-60-ish.......Also wouldn't hurt to swap in a new slave cylinder too, as they usually go bad and have to be changed anyways......Also-If your shifter is a bit sloppy, get used to it.....The M5OD is a truck tranny, so therefore it will feel like a plunger handle in a bucket of gravel no matter what.....
-Wes
-Wes
FTE Chapter Leader
Joined: May 2009
Posts: 8,843
Likes: 27
From: Eastern Ky
I searched around and here's the part number I came up with.
Part #: H243915025
Is that correct Lew? Thanks.......I was under the impression that the M5OD didn't have much of an aftermarket.....
-Wes
Part #: H243915025
Is that correct Lew? Thanks.......I was under the impression that the M5OD didn't have much of an aftermarket.....
-Wes
Thread Starter
|
New User
Joined: Feb 2011
Posts: 3
Likes: 0
Trending Topics
Senior User
Joined: Oct 2003
Posts: 279
Likes: 1
From: Mass.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
