03 cab lights
Thread Starter
|
New User
Joined: Jan 2011
Posts: 15
Likes: 0
TBH? and ok so i have led ones and it has a black wire and a white wire black should be ground right? well i hooked them to a battery first to see if they work and the white wire was ground? is this right?
Senior User
Joined: Aug 2007
Posts: 105
Likes: 0
From: Mobile, AL
You got it! White should be ground and black is power.
Tuned
Joined: Feb 2006
Posts: 273
Likes: 22
From: Methow Valley
Pull right kick panel and you will find a plug for marker lights wired to the switch already. The harness can be had at ford to run up the pillar with plugs for factory lights.
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="if(typeof(jsCall)=='function'){jsCall();} else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="if(typeof(jsCall)=='function'){jsCall();} else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">
