Leveling Question
Thread Starter
|
Junior User
Joined: Sep 2010
Posts: 56
Likes: 0
Theres nothing in the front at all. I have a fifth wheel hitch in
the bed. It off in the front by 6 inches I have measured it in many different. Places that are level. What else would I need for the 6in leaf springs. From what I read on the instructions. It said nothing else.
the bed. It off in the front by 6 inches I have measured it in many different. Places that are level. What else would I need for the 6in leaf springs. From what I read on the instructions. It said nothing else.
Senior User
Joined: Oct 2010
Posts: 136
Likes: 0
From: Bloomington
You can't go by the height difference between front and rear wheelwells. Measure the distance from the top of your wheel to the inside of your wheel well, front and back, that difference would be more accurate. Basically most guys go with the 2.5" leveling kit sold many places. You raise your front end 6 inches it will look goofy, and you will have all kinds of suspension and steering problems that will need to be addressed.
Thread Starter
|
Junior User
Joined: Sep 2010
Posts: 56
Likes: 0
You can't go by the height difference between front and rear wheelwells. Measure the distance from the top of your wheel to the inside of your wheel well, front and back, that difference would be more accurate. Basically most guys go with the 2.5" leveling kit sold many places. You raise your front end 6 inches it will look goofy, and you will have all kinds of suspension and steering problems that will need to be addressed.
More Turbo
Joined: Oct 2003
Posts: 597
Likes: 22
From: Central Maine
My truck looked just like yours after I added a leaf to the rear and F350 blocks. I just put a leveling kit in the front and it is almost perfect. Ended up with the add-a-leaf pack. Not just one leaf but a stack of 2 or 3 starting from short to long. Fairly simple install. I think I did skyjacker? but can't remember.
Ed
Ed
Senior User
Joined: Oct 2010
Posts: 136
Likes: 0
From: Bloomington
Pinion angle need adjusted most likely, shocks too short, drop pitman arm for steering, drop bracket for track bar or adjustable track bar, all new springs (no add a leaf will give you 6") and you will need a front end alignment. Don't think you need 6". Try to detemine what previous owner has done in rearend. It looks like an f350 spacer under the springs. Try replacing with an f250 spacer. Hopefully someone more knowledgeable than me will chime in.
Senior User
Joined: Oct 2010
Posts: 136
Likes: 0
From: Bloomington
Do believe that block is a f350 block. Find a f250 block and I think you will lose 2 inches in the back, maybe just one, not sure. If it's not to much trouble I would ditch that body lift, unless you are planning on using that fifth wheel hitch. To answer your question, yes a 2inch lift block, or anything smaller than what you have now would be substantially cheaper than a 6" lift. MUCH easier to install, maybe an hour per side.
Thread Starter
|
Junior User
Joined: Sep 2010
Posts: 56
Likes: 0
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
Senior User
Joined: Jan 2008
Posts: 189
Likes: 0
From: Harris,Minnesota
I have a 2 1/2" lift on my 99' F-250 and it sits about 1 1/2-2" higher in the back.I like the way it looks.If you make it perfectly level when you put a load on it will be lower in the back than the front and look crappy. Most of the 99' F-250's came with the 4" [F-350 blocks] rear blocks [newer ones came with 2" blocks]until people complained that the back was to high to load things into.
Junior User
Joined: May 2009
Posts: 50
Likes: 0
I don't think you really have a bed lift if there is no body lift on the cab or front clip. If so, your bed would be higher and the body lines wouldn't match up. Your best bet would probably be to go with shorter blocks in the rear.
Thread
Thread Starter
Forum
Replies
Last Post
hivoltj
1987 - 1996 F150 & Larger F-Series Trucks
8
Oct 26, 2012 05:45 PM
