Speedo Recal Question
Thread Starter
|
New User
Joined: Jan 2003
Posts: 4
Likes: 0
Speedo Recal Question
Hey
I read the article in the Tech-articles about recalibrating the speedo, but i have a few questions. First off...It says to use a metal clip in service wire panel connector and clip other end to ground....What should i use? And where is a good place to clip it? The frame?
Also, Is it hard to get to the dealer programming connector? And what does it look like? Thanks.
I read the article in the Tech-articles about recalibrating the speedo, but i have a few questions. First off...It says to use a metal clip in service wire panel connector and clip other end to ground....What should i use? And where is a good place to clip it? The frame?
Also, Is it hard to get to the dealer programming connector? And what does it look like? Thanks.
Thread Starter
|
New User
Joined: Jan 2003
Posts: 4
Likes: 0
Speedo Recal Question
Never mind guys. Once i found it, the directions in the Tech article got me through it in about 3 minutes. Also i can tell a big difference...the tranny is shifting smoother, the acceleration seems better and overall a better ride 
Thanks anyway
Thanks anyway
