When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I replaced my booster and master cylinder with a A-1 Cardone assembly from O'Riley auto parts here in Dallas. Put on and bled system and as soon as I touch the brake pedal it makes a wooshing sound and kind of sticks then releases slowly. Is that a bad booster? have good vacuum to booster.
Any one recommend a particular brand for reman brake parts?
It sounds like you still have air in the lines. From the description in your first post, it sounds like you did not bench bleed the master cylinder. If you didn't, it probably has air in the master still. It takes a lot of strokes with the master cylinder in the vise before all the air is out of it.
Did not bench bleed bacause they did not supply kit and I did not have anything that would work. I guess I could go get a kit. Disconnect the m/c and do it on the truck?
Very good. I pulled a lot of fluid thru the system with my air blessed and felt like I got it clear. Will try again with a proper bench bleed and go from there. Thx
bled the m/c until i was blue in the face...still no luck. went back to parts store and got my old booster..worked like a champ. now if I can get the m/c lid to seal up ill be happy. crappy reman parts !!