grill guard for 90
Thread Starter
|
Elder User
Joined: May 2002
Posts: 627
Likes: 0
From: Claremore, Ok 74017
grill guard for 90
Is there any decent heavy tube grill guards for 90 F-150's. Seen some that use what looks like just a bar of metal bent around. Was wanting a heavy tube where if needed I could push something. Thanks for any input.
New User
Joined: Oct 2001
Posts: 23
Likes: 0
From: BC, Canada
grill guard for 90
I've been looking for a good heavy duty one for a while.. a friend of mine recently found one at a wreckers, however it has no brand name on it, so we think it's a homemade one (bumper and all). Have you checked Westin or Smittybilt or anything like that? They're pretty pricey though. What do you think it'd take to make your own?
- Rob
'90 F-150 XLT Lariat
32" BFG Allterrains
Few Lund Accessories
- Rob
'90 F-150 XLT Lariat
32" BFG Allterrains
Few Lund Accessories
Posting Guru
Joined: Mar 2000
Posts: 2,306
Likes: 0
grill guard for 90
yo racer!
We have a Setina Police/Military 16" Push Bumper on our 96 bronco...see my Gallery for a pic or two.
It works well of course and is avail in alum or steel; both powdercoated black.
Cost was about $125.00 +s/h
http://www.setina.com/
We have a Setina Police/Military 16" Push Bumper on our 96 bronco...see my Gallery for a pic or two.
It works well of course and is avail in alum or steel; both powdercoated black.
Cost was about $125.00 +s/h
http://www.setina.com/
Mountain Pass
Joined: Jan 2003
Posts: 102
Likes: 1
grill guard for 90
Hi,
I'm looking for the same thing, but for a '90 F250 (front leaf springs). The only off-the-shelf one I could find was actually
a warn winch bumper - which is not too bad, ~ $500.
Chris.
>Is there any decent heavy tube grill guards for 90 F-150's.
>Seen some that use what looks like just a bar of metal bent
>around. Was wanting a heavy tube where if needed I could
>push something. Thanks for any input.
I'm looking for the same thing, but for a '90 F250 (front leaf springs). The only off-the-shelf one I could find was actually
a warn winch bumper - which is not too bad, ~ $500.
Chris.
>Is there any decent heavy tube grill guards for 90 F-150's.
>Seen some that use what looks like just a bar of metal bent
>around. Was wanting a heavy tube where if needed I could
>push something. Thanks for any input.
