When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just straight piped the exhaust and now about 45 miles later im pulling a code PO470... Any insight into what this may be? Could the straight exhaust have something to do with it? GRRRR Im 47 miles out of warranty!
Maybe I should have clarified a bit......this cold medicine is kickin' my butt big time.
Going to a bigger exhaust will NOT give you the P0470 code, but the EBP sensor certainly could, especially on an 06. Check the sensor, wiring, and clean the tube before replacing the sensor. It could simply be carbon blocking the tube. Sorry for the confusion. I apologize and corrected my first post.
Maybe I should have clarified a bit......this cold medicine is kickin' my butt big time.
Going to a bigger exhaust will NOT give you the P0470 code, but the EBP sensor certainly could, especially on an 06. Check the sensor, wiring, and clean the tube before replacing the sensor. It could simply be carbon blocking the tube. Sorry for the confusion. I apologize and corrected my first post.
Ok guys... A month later it pulled the same code... I guess I am going to have to tear into this thing...
One thing that I have noticed is when I am going a steady speed (45-50) it sounds kinda odd to me... Kinda like a surging sound. Truck runs fine though....
Does anyone know where I can go to figure out how to do this? I dont have a problem doing things myself... I just want to fix it and fix it right the first time...